Application of Photo-Fenton Process For the removal of Nitrate from Aqueous Solutions

authors:

avatar Mohammad Reza Samarghandi 1 , avatar Bahman Golzar Khojasteh 2 , *

Center for Health Research, School of Public Health, Hamedan University of Medical Sciences, Hamedan, Iran
Department of Environmental Health Engineering, School of Public Health, Hamedan University of Medical Science, Hamedan, Iran

how to cite: Samarghandi M R, Golzar Khojasteh B. Application of Photo-Fenton Process For the removal of Nitrate from Aqueous Solutions. Jundishapur J Health Sci. 2013;5(2):e94031. 

Abstract

Introduction: Nitrate is one of the pollutants of groundwater and the great amount of nitrate in drinking water can bring about some hygienic problems such as methemoglobinema phenomena in children. Therefore, this research aims to study the efficiency of photo- Fenton in removing nitrate and investigating the variables affecting it in aqueous solutions.
Methods and Materials: This research was carried out in water and wastewater chemistry lab at public health faculty of Hamadan medical science university. The variable parameters in this study included pH( in four ranges 3,5,7 & 11), the concentration of zerovalent iron powder (in four ranges of 10, 15, 20 & 30 g/L)، the concentration of peroxide hydrogen (in four ranges of 5, 10, 15 and 20 ml/L)، contact time (in four ranges 30, 60, 90 & 120 min). , along with the use of UV lamp with overage pressure of 30W and wavelength of 247/3 nm as the source.
Results: According to the results from this study, decreasing pH can increase the efficiency of removal. The highest efficiency of removal occurred in pH=3, contact time 120 min, H2O2 of 10 ml/L and iron powder of 30 g/L, which was equal to 98.8 percent. Conclusions: Given the results of this research, photo-Fenton process could be used efficiently for the removal of nitrate from water resources.

Fulltext

The fulltext is available in PDF file.

References

  • 1.

    The references are available in PDF file.