IJ Radiology
Amir Hossein Saveh1,*, 
Ali Reza Zali1, Hamidreza Haghighatkhah2, Morteza Sanei Taheri2, Seyed Morteza Kazemi3, Mahmoud Chizari4, Kazuyoshi Gammada5The salvage proximal femoral osteotomy is performed in mild to moderate forms of osteoarthritis when the articulating surfaces are normal and relieves the subjects pain. Because of the importance of angular mal-alignment of the femur bone at the hip junction, accurate pre-op planning based on patient specific anatomy is required to prevent any lower misalignment and joint problem.
In this study, a virtual CT-Based modeling technique was used to a 3D-Model of the patients pelvis and proximal femur. The registration stage using angio-fluoroscopy was performed to calculate the proximal femur kinematic and input it into a finite element model to achieve the stress distribution pattern of femoroacetabular joint.
To assess the biomechanics of the joint contact surface, it is necessary to have the stress distribution in the articulating surfaces of the hip joint. The decision about the salvage surgical approach and the appropriate plan for wedge excision will be made based on the biomechanical results at the joint. FE model also provides additional information on the stress profile of the contact surface when the joint moves from full extension to full flexion.
Use of a non-invasive 3D modeling method will remediate the surgical approach in pre-op stage. Here, the in-vivo modeling and assessment of the patient femuroacetabular contact is approved. It has been shown that the accuracy of the proposed model is comparable with the existing surgical pre-op planning.
Full text is available in PDF
© 2014, Author(s). This open-access article is available under the Creative Commons Attribution 4.0 (CC BY 4.0) International License (https://creativecommons.org/licenses/by/4.0/), which allows for unrestricted use, distribution, and reproduction in any medium, provided that the original work is properly cited.
Leave a comment here
Purchasing Reprints
Author(s):
