Ecological Risk Assessment of Heavy Metals in the Atmospheric Dry Deposition in Hamedan City

authors:

avatar Soheil Sobhanardakani ORCID 1 , *

Department of Environment, Hamedan Branch, Islamic Azad University, Hamedan, Iran

how to cite: Sobhanardakani S. Ecological Risk Assessment of Heavy Metals in the Atmospheric Dry Deposition in Hamedan City. J Kermanshah Univ Med Sci. 2018;22(1):e69642. https://doi.org/10.5812/jkums.69642.

Abstract

Background:

Dust pollution can cause serious ecological problems. Therefore, the current study aimed to carry out the ecological risk assessment of heavy metals (Co, Cr, and Mn) in the atmospheric dry deposition in Hamedan city, Iran.

Methods:

In the current study, 36 samples of atmospheric dry deposition were collected from three regions of Hamedan city from September to October 2014. After sample digestion in the laboratory, the content of the metals was determined using inductively coupled plasma-optical emission spectrometer (ICP-OES). All statistical analyses were performed using the SPSS statistical package.

Results:

The results showed that the average contents (mg kg-1) of Co, Cr, and Mn in the studied samples were 0.23 ± 0.06, 0.89 ± 0.20, and 8.10 ± 0.70, respectively. The results of the potential ecological risk analysis of heavy metal pollution in the atmospheric dry deposition in Hamedan city demonstrated that the risk index (RI) of stations A, B, and C with an average of 0.13 is at low ecological risk levels.

Conclusions:

In present study the potential ecological risk of Co, Cr, and Mn was at low levels. Also, the results showed that the Co and Mn contents in the atmospheric dry deposition collected from the stations with heavy traffic intensity were significantly higher than that in the other stations. Therefore, control of the anthropogenic sources that cause discharge of hazardous compounds, particularly toxic heavy metals, into the atmosphere is recommended.

1. Background

Natural and anthropogenic sources, such as soil erosion, sea spray, mining, industrial activities, urbanization, agriculture, power generations, construction activities, and fossil fuel combustion, can cause emissions of particles and gases into the atmosphere through dry deposition pathway (1, 2).

Since the heavy metals are indestructible, they are not easily biodegradable in the environment and accumulate in the biota and have toxic effects on living organisms; therefore, heavy metals are of great importance among the thousands of inorganic and organic matter discharged into the environment. The pollution of the natural environment by toxic heavy metals is a worldwide problem (3-6). In this regard, heavy metal contents in wet and dry atmospheric depositions, particularly respirable dust particles, have been significantly affected by anthropogenic sources. Since airborne particulate matter (PM), especially the fine particle, is a potential source of toxic heavy metals for urban residents via inhalation, oral (ingestion), and also dermal absorption, they can cause adverse effects on human health. So, in recent years, concern about the quality of dust and atmospheric depositions has been growing around the world (7-11).

It has been proven that the contents of the PMs airborne aerosols in the urban atmospheres are related to traffic pollutants (e.g., heavy metals and organic compounds), caused by combustion of fuel and depreciation of vehicle parts. Also, the dispersion and distribution of environmentally sensitive elements depend heavily on the particle size and the surface properties of the substrate on which the metals are deposited (12-14).

Cobalt as an essential nutrient is beneficial for humans, being an integral part of vitamin B12, and is necessary for proper endocrine functioning, especially thyroid, and has an important role in the regulation of blood pressure. However, exposure to high amounts of this element can cause serious effects on the lungs, including asthma, wheezing, and pneumonia (15-18).

Chromium (III), similar to cobalt, is an essential mineral that is widely distributed in the human body tissues in extremely low and variable quantity. This element can help the body utilize lipid, protein, and also carbohydrates (16, 19). Hexavalent chromium (VI) compounds are toxic and known human carcinogens. Breathing high levels of this element can cause adverse effects on human health (e.g., irritation to the lining of the nose, nose ulcers, running nose, cough, asthma, shortness of breath, or wheezing) (20).

Manganese is known as an essential element, but the toxicity of Mn has been reported via occupational and dietary overexposure. The exposure to high levels of Mn can cause adverse health effects, especially effects on the central nervous system, liver, lung, heart, and reproductive system. Also, neurotoxicity of Mn can cause a progressive disorder of the extrapyramidal system similar to Parkinson’s disease (21).

Atmospheric dry deposition as an important carrier of contaminants is a typical non-point source (22). Therefore, studying the characteristics of atmospheric dry deposition pollution is an important aspect of urban environmental quality assessment and also human health risk assessment. In this regard, risk index (RI) proposed by Håkanson indicates the sensitivity of the biological community to the toxic heavy metals and illustrates the potential ecological risk caused by the overall contamination (23, 24).

The determination of trace elements in dry atmospheric depositions has been reported by several authors. In this regard, Zheng et al. (2005) analyzed fourteen major and trace elements in dry and wet deposition samples collected in Hong Kong (1). Al-Momani et al. (2008) determined the content of some major and trace elements in the atmospheric deposition in Amman, Jordan (8). In another study, some heavy metal concentrations in falling dust were measured in eastern Mazowieckie Province, Poland (25). Abah et al. (2014) reported some trace metal content in atmospheric dust deposition in Katima Mulilo metropolis, Namibia (26). Also, Tabatabaei et al. (2015) studied the geospatial patterns and background levels of heavy metals in the deposited PM in Bushehr, Iran (27).

Nowadays, due to population explosion, urbanization, and industrialization, the urban environments of developing countries like Iran are experiencing unprecedented environmental challenges. In this regard, since no studies have been carried out for the ecological risk assessment of heavy metals in atmospheric dry deposition in Hamedan city, the current study aimed to analyze and assess the ecological and health risk of heavy metals (Co, Cr, and Mn) in atmospheric dry deposition in regions with different traffic intensities in Hamedan city in 2014.

2. Methods

2.1. Study Area

Hamedan city, the capital of Hamedan province, is one of the biggest cities in the western part of Iran, located in the northern part of Alvand mountain at an altitude of 1850 m above sea level and lies between longitude 48° 31’ E and latitude 34° 48’ N with an urban area of about 56 km2 and population of 581,925. The climate of Hamedan is favorable, with four distinct seasons. Hamedan has cold winters, and there is usually rainfall in the winter and spring. The annual average temperature and annual average precipitation of this city are 11.3°C and 317.7 mm, respectively (28).

2.2. Reagents

In the current study, standard stock solutions were of analytical grade (Merck, Darmstadt, Germany). They were used to prepare working solutions after appropriate dilution for analyzing the elemental ions at the concentration of 1000 µg L-1. Also, distilled deionized water was used in all the dilution procedures.

2.3. Sampling and Sample Analysis

In this descriptive study, according to the Cochran’s sample size formula and also considering the financial and time constraints, 36 atmospheric dry deposition samples were collected over a five days interval from mid-September to mid-October, 2014. The samples were collected from the residential areas of three regions of Hamedan city with high (A), moderate (B), and low/light (C) traffic intensity by placing high-density polyethylene bucket of 30 cm diameter on an elevated tripod stand (1 m) above the ground surface to minimize contamination from resuspended particles generated by natural wind and induced by traffic. The geographic coordinates of the sampling sites are presented in Table 1. For sample digestion, after transferring 1.0 g of each sieved sample into a digestion vessel and adding 10 mL of nitric acid 65% (Sigma-Aldrich, Spain), the solution was covered with a watch glass. Then, the samples were heated to 90°C and refluxed at this temperature for 15 minutes after which they were allowed to cool for 10 minutes at 20°C. After that, 5 mL of concentrated HNO3 was added to each solution, covered, and refluxed again at 90°C for 30 minutes. Then, the solutions were allowed to evaporate without boiling to approximately 5 mL each and cooled again for 10 minutes at room temperature. This was followed by the addition of 2 mL of double-distilled water and 3 mL of H2O2 (30%) to each solution. For the start of peroxide reaction, the digestion vessels were covered and heated just enough to warm the solutions. This process was continued until effervescence subsided, and the solutions were cooled (1, 8, 28). Finally, the content of the elements was analyzed using inductively coupled plasma-optical emission spectrometer (710-ES, Varian, Australia) at wavelengths of 228.615 nm for Co, 267.716 nm for Cr, and 257.610 nm for Mn.

Table 1.

Geographic Coordinates of the Sampling Sites

Sampling StationGeographic Coordinates
A34°51’23” N; 48°46’51” E
B34°59’22” N; 48°53’07” E
C34°58’59” N; 48°58’49” E

2.4. Potential Ecological Risk Assessment

Potential ecological RI of heavy metal levels in the atmospheric dry deposition in Hamedan city was assessed in accordance with Equation 1 (29, 30):

Equation 1.

where Eri represents the potential ecological risk factor of metal i; Ti indicates the toxic response factor of metal i (1, 2, and 5 for Mn, Cr, and Co, respectively); Cfi, Csi, and Cbi represent the pollution factor of the metal i, the content of the metal i in the atmospheric dry deposition samples, and the background value of the metal i (19 for Co, 31 for Cr, and 850 for Mn), respectively (30-33).

According to Hakanson (1980), Eri < 40, 40 < Eri ≤ 80, 80 < Eri ≤ 160, 160 < Eri ≤ 320, and Eri > 320 indicate low ecological risk, moderate ecological risk, appreciable ecological risk, high ecological risk, and serious ecological risk, respectively. Also, RI is classified into four categories as follows: RI < 150 represents low ecological risk; 150 < RI < 300 indicates moderate ecological risk; 300 < RI < 600 represents high ecological risk; and RI ≥ 600 indicates significantly high ecological risk (29).

2.5. Statistical Analysis

The statistical analysis of the obtained results consisted first of Shapiro-Wilk normality test followed by the study of the variance homogeneity using a parametric test, ANOVA, with a DMS post hoc and Duncan multiple range test. The mean levels of the elements in the atmospheric dry deposition were compared with maximum permissible concentrations (MPC) using a one-sample t-test. Finally, to study the correlation between the metals in the different samples, the 2-tailed test of Pearson correlation was performed.

3. Results

3.1. Heavy Metal Concentration

The mean content of heavy metals in the atmospheric dry deposition is presented in Table 2. The data in Table 2 shows that the Co content (mg kg-1) in the analyzed samples ranged from 0.17 to 0.34 with an average of 0.23 ± 0.06. The chromium content (mg kg-1) in the analyzed samples ranged from 0.61 to 1.21 with an average of 0.89 ± 0.20. Also, the Mn content (mg kg-1) in the analyzed samples ranged from 7.19 to 8.95 with an average of 8.10 ± 0.70.

Table 2.

Heavy Metal Analysis of Atmospheric Dry Deposition (mg kg-1)a

Sampling StationMetal Concentration
CoCrMn
A0.29 ± 0.04a1.01 ± 0.01a8.82 ± 0.11a
B0.21 ± 0.04b1.02 ± 0.17a8.24 ± 0.09b
C0.19 ± 0.03b0.65 ± 0.05b7.23 ± 0.03c
Min.0.170.617.19
Max.0.341.218.95
Mean0.230.898.10
S.D.0.060.200.70

3.2. Statistical Analysis Results

The independent one-sample t-test comparing the analyzed heavy metal contents in the atmospheric dry deposition samples with the MPC (mg kg-1) (30.0, 100.0, and 1500.0 for Co, Cr, and Mn, respectively) established by WHO (34) shows that the mean contents of elements in all the samples were lower than the MPC.

In the current study, Pearson’s test was used to compare the heavy metal concentrations in the atmospheric dry deposition. A positive relationship was found between Co and Mn (r = 0.735, P = 0.024) and also Cr and Mn (r = 0.857, P = 0.003). In this regard, when the Co and Cr contents increased, the Mn content also increased.

3.3. Potential Ecological Risk Assessment Results

The results of the evaluation of the potential ecological risk factor and RI are presented in Table 3. Based on the results, the order of the potential ecological risk coefficient of heavy metals in the atmospheric dry deposition in Hamedan city was Co > Cr > Mn. Also, the Eri coefficient values with an average of 0.06, 0.06, and 0.007 for Co, Cr, and Mn, respectively, indicated a low ecological risk. Therefore, the computed Eri coefficient value represents the low ecological risk of heavy metals in the atmospheric dry deposition in the study area. On the other hand, since the RI values were 0.16 for sampling station A, 0.13 for sampling station B, and 0.10 for sampling station C, the risk level of heavy metals in the atmospheric dry deposition in Hamedan city was low in all the stations.

Table 3.

Evaluation of Potential Risk of Heavy Metal Pollution in Atmospheric dry Deposition in Hamedan City

Sampling StationPotential Ecological Risk Factor EiRIRisk Grade
CoCrMn
A0.080.070.010.16Low
B0.060.070.0010.13Low
C0.050.040.0090.10Low
Mean0.060.060.0070.13Low

4. Discussion

Atmospheric dry deposition is a natural global process of cycling PM that is now dominated by anthropogenic-origin pollution in most urban settlements. Therefore, this study was conducted to assess the ecological risk of Co, Cr, and Mn in the atmospheric dry deposition in Hamedan city.

4.1. Cobalt

Natural and anthropogenic sources, including erosion, weathering of soil and rocks, sea water spray, forest fires, volcanoes, continental and marine biogenic emissions, and also traffic, are the main sources of Co in the atmospheric dry deposition or street dust (35). In the current study, Co values in the atmospheric dry deposition samples were found to be within the range of 0.17 to 0.34 mg kg-1. The highest mean level of Co was found in the station with heavy traffic intensity (0.29 ± 0.04 mg kg-1), coming from the wear of the brake lining and corrosion of the metallic parts of vehicles (2, 36). In this regard, it should be noted that the level of Co in the dry deposition samples was found to be lower than the mean values in Baotou, Nanjing, Oslo, Honolulu, Kayseri, and Hangzhou (24, 37-42). Also, the level of Co in the present study is much varied from that in the investigated area in Madrid (3.00 mg kg-1) and Luanda (2.90 mg kg-1) (37, 43). Based on the results of the related literature, the Co content in the resuspended particles of urban street dust collected from Baotou City reveals moderate to considerable ecological risk (42). The computed potential ecological risk factor of Co in the atmospheric dry deposition in the study area indicated that the ecological risk of dust was low. A comparison of metal content in the atmospheric dry deposition/street dust from Hamedan city with some other cities reported in the literature is presented in Table 4.

Table 4.

Comparison of the Heavy Metal Contents (mg kg-1) in Atmospheric Dry Deposition in Hamedan City and Other Selected Cities

LocationMetalReference
CoCrMn
Iran (Hamedan)0.230.898.10Present study
Poland (Mazowieckie)-29.50392.30(25)
Kosovo10.7726.0392.75(36)
Turkey (Yazgat)26.1072.80274.00(44)
Angola (Luanda)-25.65258.00(43)
China (Guangzhou)13.0078.80481.00(45)
Turkey (Kayseri)16.5029.00-(40)
Iran (Tehran)-33.301212.00(46)
Jordan (Aqaba)14.8522.3464.67(2)
China (Xi’an)-52.61-(47)
China (Hangzhou)19.9651.29-(41)
China (Baoji)15.90126.70804.20(48)
China (Shanghai)-110.75-(49)
Iran (Kermanshah)-37.45-(50)
Iran (Bushehr)5.14--(51)
China (Baotou)56.20247.80566.30(42)

4.2. Chromium

Chromium is used in many alloys, particularly stainless steel. In this regard, welding, grinding, and polishing of stainless steel can lead to the release of Cr into the environment. The consequences of chronic exposure to Cr are skin irritation, damage to the kidneys or liver, and circulatory and neurological disorders (20, 52). In this study, the Cr contents in atmospheric dry deposition samples were found to be within the range of 0.61 mg kg-1 to 1.21 mg kg-1. The highest mean level of Cr was found in the station with moderate traffic intensity (0.89 ± 0.20 mg kg-1). However, no significant difference was found between the heavy and moderate traffic stations. The presence of Cr in the samples can be related to combustion of fossils fuels and waste incineration (20, 53). The obtained results are contrary to the findings of Li et al. (24) and Kartal et al. (39) who concluded that the values of Cr in urban street dust collected from Nanjing, China, and the street sediment samples from Kayseri, Turkey, were 67.13 mg kg-1 and 27.91 mg kg-1, respectively. Also, Xu et al. (2015) reported that the Cr content in the resuspended particles of urban street dust collected from Baotou city reveals low to moderate ecological risk levels (42). In the current study, the computed potential ecological risk factor of Cr indicated that the ecological risk of atmospheric dry deposition collected from Hamedan city was low. A comparison of our findings with that of other studies is shown in Table 4.

4.3. Manganese

It has been proven that geological material (lithogenic source), traffic, and tire wear are the main sources of Mn in the street dust or atmospheric dry deposition (44). The Mn content in the atmospheric dry deposition samples was found to be within the range of 7.19 - 8.95 mg kg-1. Also, the highest mean level of Mn was found in the station with heavy traffic intensity (8.82 ± 0.11 mg kg-1). The average concentration of Mn reported in the literature is 687 mg kg-1 in the street dust collected from Xian (54). On the other hand, the computed values of the potential ecological risk confirmed the result of the other study which showed that the ecological risk of Mn content in the resuspended particles of urban street dust collected from Baotou city was low (42). A comparison of the Mn contents in the atmospheric dry deposition in Hamedan city and that in other selected cities are presented in Table 4.

4.4. Conclusion

Based on the results of the present study, the potential ecological risk of Co, Cr, and Mn was at low levels. Also, the results showed that the Co and Mn contents in the atmospheric dry deposition collected from a station with heavy traffic intensity were significantly higher than that of the other stations. Therefore, based on the results as well as the research constraints, including lack of financial support and lack of time, control of the anthropogenic sources which cause discharge of hazardous pollutants, particularly toxic heavy metals, into the atmosphere, including industrial activities, power generation, construction activities, corrosion of automobile parts, and fossil fuel combustion, assessment of other hazardous chemical compounds in the atmospheric dust, and also, health risk assessment of the toxic heavy metals in atmospheric dust is recommended.

Acknowledgements

References

  • 1.

    Zheng M, Guo Z, Fang M, Rahn KA, Kester DR. Dry and wet deposition of elements in Hong Kong. Mar Chem. 2005;97(1-2):124-39. https://doi.org/10.1016/j.marchem.2005.05.007.

  • 2.

    Al-Khashman OA. The investigation of metal concentrations in street dust samples in Aqaba city, Jordan. Environ Geochem Health. 2007;29(3):197-207. [PubMed ID: 17288008]. https://doi.org/10.1007/s10653-006-9065-x.

  • 3.

    Sobhanardakani S, Talebiani S, Maànijou M. Evaluation of As, Zn, Pb and Cu concentrations in groundwater resources of Toyserkan Plain and preparing the zoning map using GIS. J Mazandaran Univ Med Sci. 2014;24(114):120-9. Persian.

  • 4.

    Melaku S, Morris V, Raghavan D, Hosten C. Seasonal variation of heavy metals in ambient air and precipitation at a single site in Washington, DC. Environ Pollut. 2008;155(1):88-98. [PubMed ID: 18069104]. https://doi.org/10.1016/j.envpol.2007.10.038.

  • 5.

    Mortazavi S, Saberinasab F. Heavy metals assessment of surface sediments in Mighan Wetland using the sediment quality index. Ecopersia. 2017;5(2):1761-70.

  • 6.

    Sobhanardakani S, Taghavi L, Shahmoradi B, Jahangard A. Groundwater quality assessment using the water quality pollution indices in Toyserkan Plain. Environ Health Eng Manage. 2016;4(1):21-7. https://doi.org/10.15171/ehem.2017.04.

  • 7.

    Valavanidis A, Fiotakis K, Vlahogianni T, Bakeas EB, Triantafillaki S, Paraskevopoulou V, et al. Characterization of atmospheric particulates, particle-bound transition metals and polycyclic aromatic hydrocarbons of urban air in the centre of Athens (Greece). Chemosphere. 2006;65(5):760-8. [PubMed ID: 16674985]. https://doi.org/10.1016/j.chemosphere.2006.03.052.

  • 8.

    Al-Momani IF, Momani KA, Jaradat QM, Massadeh AM, Yousef YA, Alomary AA. Atmospheric deposition of major and trace elements in Amman, Jordan. Environ Monit Assess. 2008;136(1-3):209-18. [PubMed ID: 17370132]. https://doi.org/10.1007/s10661-007-9676-4.

  • 9.

    Shi G, Chen Z, Xu S, Zhang J, Wang L, Bi C, et al. Potentially toxic metal contamination of urban soils and roadside dust in Shanghai, China. Environ Pollut. 2008;156(2):251-60. [PubMed ID: 18703261]. https://doi.org/10.1016/j.envpol.2008.02.027.

  • 10.

    Sobhanardakani S, Saedi M. Assessment of particulate matter, free silica and toxic gases emissions from Khouzestan cement company. J Mazandaran Univ Med Sci. 2015;25(125):21-31. Persian.

  • 11.

    Khamooshi S, Panahi F, Vali A, Mousavi SH. Dust storm monitoring using HYSPLIT model and NDDI (case study: southern cities of Shiraz, Bushehr and Fasa, Iran). Ecopersia. 2016;4(4):1603-16. https://doi.org/10.18869/modares.ecopersia.4.4.1603.

  • 12.

    Park SS, Kim YJ. Source contributions to fine particulate matter in an urban atmosphere. Chemosphere. 2005;59(2):217-26. [PubMed ID: 15722093]. https://doi.org/10.1016/j.chemosphere.2004.11.001.

  • 13.

    Vallius M, Janssen NA, Heinrich J, Hoek G, Ruuskanen J, Cyrys J, et al. Sources and elemental composition of ambient PM(2.5) in three European cities. Sci Total Environ. 2005;337(1-3):147-62. [PubMed ID: 15626386]. https://doi.org/10.1016/j.scitotenv.2004.06.018.

  • 14.

    Wong CS, Li X, Thornton I. Urban environmental geochemistry of trace metals. Environ Pollut. 2006;142(1):1-16. [PubMed ID: 16297517]. https://doi.org/10.1016/j.envpol.2005.09.004.

  • 15.

    Lauwerys R, Lison D. Health risks associated with cobalt exposure--an overview. Sci Total Environ. 1994;150(1-3):1-6. [PubMed ID: 7939580]. https://doi.org/10.1016/0048-9697(94)90125-2.

  • 16.

    Hosseini SV, Sobhanardakani S, Tahergorabi R, Delfieh P. Selected heavy metals analysis of Persian sturgeon's (Acipenser persicus) caviar from Southern Caspian Sea. Biol Trace Elem Res. 2013;154(3):357-62. [PubMed ID: 23824563]. https://doi.org/10.1007/s12011-013-9740-6.

  • 17.

    Agency for Toxic Substances and Disease Registry (ATSDR). Public health statement for Cobalt. U.S. Department of Health and Human Service. 395. Atlanta: Public Health Service; 2014.

  • 18.

    Sobhanardakani S, Jamshidi K. Assessment of metals (Co, Ni, and Zn) content in the sediments of Mighan Wetland using geo-accumulation index. Iran J Toxicol. 2015;9(30):1386-90.

  • 19.

    Stancheva M, Makedonski L, Peycheva K. Determination of heavy metal concentrations of most consumed fish species from Bulgarian Black Sea coast. Bulg Chem Commun. 2014;46(1):195-203.

  • 20.

    Kabata-Pendias A. Trace Elements in Soils and Plants. Fourth ed. Florida, USA: CRC Press; 2010. p. 231-3. https://doi.org/10.1201/b10158.

  • 21.

    O'Neal SL, Zheng W. Manganese Toxicity Upon Overexposure: a Decade in Review. Curr Environ Health Rep. 2015;2(3):315-28. [PubMed ID: 26231508]. https://doi.org/10.1007/s40572-015-0056-x.

  • 22.

    Duong TT, Lee BK. Determining contamination level of heavy metals in road dust from busy traffic areas with different characteristics. J Environ Manage. 2011;92(3):554-62. [PubMed ID: 20937547]. https://doi.org/10.1016/j.jenvman.2010.09.010.

  • 23.

    Sun Y, Zhou Q, Xie X, Liu R. Spatial, sources and risk assessment of heavy metal contamination of urban soils in typical regions of Shenyang, China. J Hazard Mater. 2010;174(1-3):455-62. [PubMed ID: 19825507]. https://doi.org/10.1016/j.jhazmat.2009.09.074.

  • 24.

    Li H, Qian X, Hu W, Wang Y, Gao H. Chemical speciation and human health risk of trace metals in urban street dusts from a metropolitan city, Nanjing, SE China. Sci Total Environ. 2013;456-457:212-21. [PubMed ID: 23602974]. https://doi.org/10.1016/j.scitotenv.2013.03.094.

  • 25.

    Królak E. Heavy metals in falling dust in eastern Mazowieckie Province. Pol J Environ Stud. 2000;9(6):517-22.

  • 26.

    Abah J, Mashebe P, Onjefu SA. Some trace metals content of atmospheric dusts deposition in Katima Mulilo metropolis, Namibia. IOSR J Environ Sci Toxicol Food Technol. 2014;8(2):5-13. https://doi.org/10.9790/2402-08220513.

  • 27.

    Tabatabaei T, Karbassi AR, Moatar F, Monavari SM. Geospatial patterns and background levels of heavy metal in deposited particulate matter in Bushehr, Iran. Arab J Geosci. 2014;8(4):2081-93. https://doi.org/10.1007/s12517-013-1241-6.

  • 28.

    Shokri Ragheb P, Sobhanardakani S. Analysis of Co, Cr and Mn concentrations in atmospheric dry deposition in Hamadan City. Sci J Hamadan Univ Med Sci. 2016;23(2):149-56. Persian.

  • 29.

    Hakanson L. An ecological risk index for aquatic pollution control.a sedimentological approach. Water Res. 1980;14(8):975-1001. https://doi.org/10.1016/0043-1354(80)90143-8.

  • 30.

    Soliman NF, Nasr SM, Okbah MA. Potential ecological risk of heavy metals in sediments from the Mediterranean coast, Egypt. J Environ Health Sci Eng. 2015;13:70. [PubMed ID: 26457189]. https://doi.org/10.1186/s40201-015-0223-x.

  • 31.

    Xu ZQ, Ni SJ, Tuo XG. Calculation of heavy metals toxicity coefficient in the evaluation of potential ecological risk index. Environ Sci Technol. 2008;31:112-5.

  • 32.

    Sobhanardakani S, Ghoochian M. Analysis of heavy metals in surface sediments from Agh Gel Wetland, Iran. Iran J Toxicol. 2016;10(4):41-6.

  • 33.

    Sobhanardakani S, Mohammadi-Roozbahani M, Sorooshnia R, Karimi H. Assessment of heavy metal contamination in surface soils of Ahvaz IV industrial Estate, Khuzestan Province, Iran. Iran J Health Sci. 2016;4(1):53-61. https://doi.org/10.18869/acadpub.jhs.4.1.53.

  • 34.

    Chen TB, Zheng YM, Lei M, Huang ZC, Wu HT, Chen H, et al. Assessment of heavy metal pollution in surface soils of urban parks in Beijing, China. Chemosphere. 2005;60(4):542-51. [PubMed ID: 15950046]. https://doi.org/10.1016/j.chemosphere.2004.12.072.

  • 35.

    Nriagu JO. A global assessment of natural sources of atmospheric trace metals. Nature. 1989;338(6210):47-9. https://doi.org/10.1038/338047a0.

  • 36.

    Arditsoglou A, Samara C. Levels of total suspended particulate matter and major trace elements in Kosovo: a source identification and apportionment study. Chemosphere. 2005;59(5):669-78. [PubMed ID: 15792664]. https://doi.org/10.1016/j.chemosphere.2004.10.056.

  • 37.

    Miguel E, Llamas JF, Chacón E, Berg T, Larssen S, Røyset O, et al. Origin and patterns of distribution of trace elements in street dust: Unleaded petrol and urban lead. Atmos Environ. 1997;31(17):2733740. https://doi.org/10.1016/s1352-2310(97)00101-5.

  • 38.

    Sutherland RA, Tack FMG, Tolosa CA, Verloo MG. Operationally defined metal fractions in road deposited sediment, Honolulu, Hawaii. J Environ Qual. 2000;29(5):1431-9. https://doi.org/10.2134/jeq2000.2951431x.

  • 39.

    Kartal S, Aydin Z, Tokalioglu S. Fractionation of metals in street sediment samples by using the BCR sequential extraction procedure and multivariate statistical elucidation of the data. J Hazard Mater. 2006;132(1):80-9. [PubMed ID: 16466857]. https://doi.org/10.1016/j.jhazmat.2005.11.091.

  • 40.

    Tokalıoğlu Ş, Kartal Ş. Multivariate analysis of the data and speciation of heavy metals in street dust samples from the Organized Industrial District in Kayseri. Atmos Environ. 2006;40(16):2797-805. Turkey. https://doi.org/10.1016/j.atmosenv.2006.01.019.

  • 41.

    Zhang M, Wang H. Concentrations and chemical forms of potentially toxic metals in road-deposited sediments from different zones of Hangzhou, China. J Environ Sci. 2009;21(5):625-31. https://doi.org/10.1016/s1001-0742(08)62317-7.

  • 42.

    Xu X, Lu X, Han X, Zhao N. Ecological and health risk assessment of metal in resuspended particles of urban street dust from an industrial city in China. Curr Sci. 2015;108(1):72-9.

  • 43.

    Ferreira-Baptista L, De Miguel E. Geochemistry and risk assessment of street dust in Luanda, Angola: A tropical urban environment. Atmos Environ. 2005;39(25):4501-12. https://doi.org/10.1016/j.atmosenv.2005.03.026.

  • 44.

    Divrikli U, Soylak M, Elci L, Dogan M. Trace heavy metal levels in street dust samples from Yozgat City Center, Turkey. J Trace Microprobe Tech. 2003;21(2):351-61. https://doi.org/10.1081/tma-120020270.

  • 45.

    Duzgoren-Aydin NS, Wong CS, Aydin A, Song Z, You M, Li XD. Heavy metal contamination and distribution in the urban environment of Guangzhou, SE China. Environ Geochem Health. 2006;28(4):375-91. [PubMed ID: 16752128]. https://doi.org/10.1007/s10653-005-9036-7.

  • 46.

    Salmanzadeh M, Saeedi M, Li LY, Nabi-Bidhendi G. Characterization and metals fractionation of street dust samples from Tehran, Iran. Int J Environ Res. 2015;9(1):213-24.

  • 47.

    Han Y, Cao J, Posmentier ES, Fung K, Tian H, An Z. Particulate-associated potentially harmful elements in urban road dusts in Xi’an, China. Appl Geochem. 2008;23(4):835-45. https://doi.org/10.1016/j.apgeochem.2007.09.008.

  • 48.

    Lu X, Wang L, Li LY, Lei K, Huang L, Kang D. Multivariate statistical analysis of heavy metals in street dust of Baoji, NW China. J Hazard Mater. 2010;173(1-3):744-9. [PubMed ID: 19811870]. https://doi.org/10.1016/j.jhazmat.2009.09.001.

  • 49.

    Zhang J, Deng H, Wang D, Chen Z, Xu S. Toxic heavy metal contamination and risk assessment of street dust in small towns of Shanghai suburban area, China. Environ Sci Pollut Res Int. 2013;20(1):323-32. [PubMed ID: 22529006]. https://doi.org/10.1007/s11356-012-0908-y.

  • 50.

    Pirsaheb M, Zinatizadeh A, Khosravi T, Atafar Z, Dezfulinezhad S. Natural airborne dust and heavy metals: a case study for kermanshah, Western iran (2005-2011). Iran J Public Health. 2014;43(4):460-70. [PubMed ID: 26005656].

  • 51.

    Naderizadeh Z, Khademi H, Ayoubi S. Biomonitoring of atmospheric heavy metals pollution using dust deposited on date palm leaves in southwestern Iran. Atmósfera. 2016;29(2):141. https://doi.org/10.20937/atm.2016.29.02.04.

  • 52.

    Economou-Eliopoulos M, Antivachi D, Vasilatos C, Megremi I. Evaluation of the Cr(VI) and other toxic element contamination and their potential sources: The case of the Thiva basin. Geosci Front. 2012;3(4):523-39. Greece. https://doi.org/10.1016/j.gsf.2011.11.010.

  • 53.

    Mishra S, Bharagava RN. Toxic and genotoxic effects of hexavalent chromium in environment and its bioremediation strategies. J Environ Sci Health C Environ Carcinog Ecotoxicol Rev. 2016;34(1):1-32. [PubMed ID: 26398402]. https://doi.org/10.1080/10590501.2015.1096883.

  • 54.

    Yongming H, Peixuan D, Junji C, Posmentier ES. Multivariate analysis of heavy metal contamination in urban dusts of Xi'an, Central China. Sci Total Environ. 2006;355(1-3):176-86. [PubMed ID: 15885748]. https://doi.org/10.1016/j.scitotenv.2005.02.026.